Before equipment operation, check whether the electric control system, light system, etc, are normal.

During the operation, observe whether there is an abnormal voice, irregular passenger riding, etc.

After the equipment operation, use a soft, wet cloth to wipe the horses, stairs, and guardrails, and keep them clean.

Check bolt fasteners of the platform connectors, columns, stairs, horse poles, etc. Re-tighten them if necessary.

Add proper amount of lubricating oil to the transmission shaft, bearings, chains, etc, to prevent rust and dry grinding. Especially for the large 2 story carousel, the lubrication job is important.

Check the electrical connection and see whether there is any lose, heat, or wear.

Check whether the steel structure has any cracks in the welds, peeling paint, or rust. Repaint and prevent corrosion in time.

Test whether all buttons (emergency stop, start, lighting control, etc.) respond promptly.

Check whether the handrails on the stairs are firm, whether the steps are non-slip, and whether there is any damage.

Stop the machine for a thorough overhaul, including the motor, reducer, control system, lighting circuit, etc.

Assess whether severely worn parts, such as bearings, motor belts, lamps, etc., need to be replaced.

It is recommended that the double-decker carousel ride used outdoors should be recoated with anti-rust and anti-corrosion coatings every 1-2 years.

Record in time when you maintain the carousel equipment, that is convenient for you to trace and assess.

Equip with spare parts, such as light bulbs, wires, fuses, bearings, etc., to quickly respond to failures. Dinis offers these spare parts for free.